First up: You can preorder the 2nd Edition of this Remora kit now at Industria Mechanika! Finally I have a chance to continue with the progress posts. First up was the rusty streaks. For these I used the AK-Interactive rust streaks, light rust and their white spirits. I also used…
I finally finished doing all of the paint and chipping on the two Remora build-ups. For the most part, it was all the same hairspray steps described in the last update. You can see on the blue ship, the ‘Lillian G’, that I added an extra boom to the mast…
Been a very busy modeler since the last update. The nature of the paint-work, inspiration, and following Ian’s painting is making painting and chipping one part at a time a necessity for my own sanity. It’s very enjoyable and I love the challenge of interpreting Ian’s painting into realistic paint…
Sorry for the update delay, but the holidays and getting the Remoras shipped out took a good bit of time. Now that they’re here and shipped I’ve started on this pair. The clean-up went smooth enough… typical sanding and whatnot.Working with the photoetch and starting to pin it all together…
(photo found on Flickr in Industrial Decay Network group) I decided to do a section of bridge over some water for the base of my Remora. The Remora will be floating above the bridge, moored to a tower similar to what’s shown in the image. The mooring point will be…
Sorry for the long absence from modeling updates. My work on Industria Mechanika has been keeping me very busy. However now I get to start building and painting the fruits of my labor! The Remora will start shipping from iMech in a few weeks and to help the anticipation go…
![Maude [Cyborg Action-Doll] (Files Only)](https://fichtenfoo.net/blog/wp-content/uploads/2023/01/Maude-Promos-300x300.jpg)
