Few forms of Anti-Gravity (AG) racing can compete with the thrill of watching pilots bank and spin their colorful Gondola Racers through circuits filled with towering obstacles and tight turns, all at breakneck speed! I was inspired to create this anti-gravity racing vehicle by the game WipeOut for the Playstation…
It took a little longer than I had planned but I’ve finally took completed images of Alb-Lab’s Markov Racer. As seen in the in-progress posts below, this particular racer was sponsored by this very website! Pretty swanky eh? You know you’ve made it when you can sponsor an anti-gravity racing…
Been a few weeks since I touched this or updated, but I wanted to show the progress so far. Since the last update I first applied about 5 layers of Future then after a week of curing I used 6000, then 8000 grit micromesh to wet-sand it to a nice…
Markov progress continues with paint and primer. I initially primed all of the parts in Duplicolor Self-Etching primer in order to bite into the resin better than normal primer. Then I buffed that with some very fine steel wool. Once nice and smooth I applied a Mr. Retarder’d layer of…
Okay, I’m back at it. While waiting for oils to dry on another kit I started assembling the VERY nicely casted and designed Markov Racer from Alb Labs. You can see an in-prog of his kit master here and can buy it here. The kit has very little clean-up so…
![Maude [Cyborg Action-Doll] (Files Only)](https://fichtenfoo.net/blog/wp-content/uploads/2023/01/Maude-Promos-300x300.jpg)
