It took a little longer than I had planned but I’ve finally took completed images of Alb-Lab’s Markov Racer. As seen in the in-progress posts below, this particular racer was sponsored by this very website! Pretty swanky eh? You know you’ve made it when you can sponsor an anti-gravity racing…
Been a few weeks since I touched this or updated, but I wanted to show the progress so far. Since the last update I first applied about 5 layers of Future then after a week of curing I used 6000, then 8000 grit micromesh to wet-sand it to a nice…
Markov progress continues with paint and primer. I initially primed all of the parts in Duplicolor Self-Etching primer in order to bite into the resin better than normal primer. Then I buffed that with some very fine steel wool. Once nice and smooth I applied a Mr. Retarder’d layer of…
Okay, I’m back at it. While waiting for oils to dry on another kit I started assembling the VERY nicely casted and designed Markov Racer from Alb Labs. You can see an in-prog of his kit master here and can buy it here. The kit has very little clean-up so…
Been a while since my last update and I’ve gotten a few emails asking what’s up and what I’m working on. Well, first I got sucked into Red Dead Redemption which was awesome. I started the 1/48 AT-AT commission to go with the Snow Speeders, but the thing requires so…
About The Designs » I acquired this new MG Rick Dias in a trade. I liked the design, but I wasn’t sure how I wanted to color it. I really didn’t know much about the Rick Dias before I saw Zeta Gundam. Even after that I needed more information to…
![Maude [Cyborg Action-Doll] (Files Only)](https://fichtenfoo.net/blog/wp-content/uploads/2023/01/Maude-Promos-300x300.jpg)
