Skip to content
FichtenFoo
Skip to content
  • Home
  • Blog
  • Model Gallery
  • 3D Design
  • Resume
  • Tutorials
  • Forum
  • Contact
Home Posts tagged "anonymous"

Tag: anonymous

Completed » Masters of the Universe: Cyberpunk Villains!

Masters of the Universe… The name conjures up memories of realizing Battle-cat was green months after the show aired because being poor at the time, we only had a small black and white TV. Also fighting with my younger brother because my genius parents decided to only get him MOTU…

Continue reading

  • Instagram Facebook Twitter Patreon YouTube
  • Custom sanding sticks. .040" sheets of styrene. 1m Custom sanding sticks. .040" sheets of styrene. 1mm thick double sided adhesive craft foam. Wet sanding paper of your choice. Blade for cutting. Sandwich foam between plastic and sandpaper. Can add another grit or same on opposite side too. You're welcome.
    So if the Eva is 18.5 inches tall... That makes th So if the Eva is 18.5 inches tall... That makes the restraint platform?
    Progress on the Eva kit. I've got the red and meta Progress on the Eva kit. I've got the red and metallic parts painted. I ended up using the Mr surfacer primer that I've had on hand for many years. But I've never found it to be all that scratch resistant so... We'll see if it's the same here. The Mr. super metal colors are nice for non realistic things like this. Otherwise I like the Mr. metal Color buffable paints.
    One of the things I've loathed about gunpla is tha One of the things I've loathed about gunpla is that since I typically use Tamiya acrylic paint, scratching and chipping can be an issue when assembling and posing kits. I plan on using Mr. Color enamels for this (the florescent green is perfection) which should help, but what about primer? Any suggestions in general? It's a big reason why I don't build much of it anymore. Also does it need primer if it's pre painted?
    The @mengmodels Evangelion kit is as cut out as I The @mengmodels Evangelion kit is as cut out as I need it to be prior to sanding any remaining flash or bits of sprue that my God Hand cutters missed. I'm also going to go over it to see if there's anywhere I want to add more details to. It's amazing so far! Looking forward to painting and assembling it.

#evangelion #eva01 #meng #mengmodels #neongenesisevangelion #plamo #gunpla #plasticmodel #modelkit #model
    The Bandai style double molding on the Meng Eva-01 The Bandai style double molding on the Meng Eva-01 look cool! Not too far into it yet but seems amazing so far.
    So apparently Bondo changed it's regular hardener So apparently Bondo changed it's regular hardener to blue and I had no idea.
    I'm calling the Goblin BJD figure done! The STL f I'm calling the Goblin BJD figure done!  The STL files and patterns for everything but the wing etch (I've included the svg of the wing silhouette) will be released in July. You'll just need 2mm elastic cord and 3mm wire for the backpack as well as fabric and (p)leather.

#goblin #steampunk #wings #flyinggoblin #bjd #bjddesign #bjdartist #doll #actionfigures #originalcharacter #originaldesign #goggles #brass #fantasy #arttoy
    Here's the near finished backpack for my Goblin BJ Here's the near finished backpack for my Goblin BJD figure. I used my leftover hornet kit wing etch and blackened it with some burnishing agent which also left a cool oily rainbow look in spots. Glass vial is filled with baby oil tinted with oil paint for the fuel. The etch is still available from industria mechanika and the 3d files will be included with the goblin fileset. The wings attach BJD style and I sandwiched parchment between the etch frame layers.

#steampunk #parchment, brass #photoetching
#photoetch #hornethopter #hornet @industriamechanika #goblin #bjd
    Loving this custom tarnished brass mix. Mr. Metal Loving this custom tarnished brass mix. Mr. Metal Color Iron and Brass. About 3:1 iron :brass ratio. The blobs inside the goggles are poster-tack to mask off the lenses. I'll hand paint the edges.
    Neighborhood cat has been showing up at our front Neighborhood cat has been showing up at our front door almost daily to hang out with (annoy) our cats. His name is Sammy and he's a sweetie. We give him water occasionally since it's been really hot, but mostly I think he comes for the attention. Wants to come inside in the worst way. hahah!
    Working on the costume for my Goblin BJD. The over Working on the costume for my Goblin BJD. The overalls still need a lot more detail as I plan to add some panels above the knees and the straps. I also need to make shoes which are going to be a whole new foot piece. Hope you like fish heads because that's what he's going to be wearing. haha! The solares flexible UV resin is what I used for the sueding inside the joint cups. He's going to also have a cap and goggles and ornithopter backpack using my leftover hornet kit wing etch.

#goblin #bjdartist #bjd #elastictensionfigure #3d #3ddesign #actionfigures #fantasy #monster #doll #originalcharacter
    My goblin figure design came out really well and d My goblin figure design came out really well and didn't need any adjustments to the design. Nice and creepy in the traditional non-green flesh that apparently became the norm in the 60s because of the Lee/Kirby green goblin villain. Next up is some hair on the eyebrows and a little ultra matte in the face as it got a bit shiny. After that I'll design his costume and accessories. Going to have a cyber/steam punk vibe.

#goblin #bjdartist #bjd #elastictensionfigure #3d #3ddesign #actionfigures #fantasy #monster #doll #originalcharacter
    Oil paint washes. #goblin #bjdartist #bjd #elast Oil paint washes. 

#goblin #bjdartist #bjd #elastictensionfigure #3d #3ddesign #actionfigures #fantasy #monster #doll #originalcharacter
    A little flesh tone advice when using Siraya Tech A little flesh tone advice when using Siraya Tech Fast Creamy resin. Polish the parts with #0000 grade steel wool, apply a coat of matte Krylon UV resistant clear, then speckle thinned oil paint onto the parts using an old toothbrush. I used blue, then burnt sienna, and finally a little brown. It'll take a few coats to build up the mottled finish, but it has a more realistic skin look when done. I applied another coat of Krylon matte and when it cures I'll start adding thin washes of reds to the extremities, lips, nose, ears, etc...
goblin #bjdartist #bjd #elastictensionfigure #3d #3ddesign #actionfigures #fantasy #monster #doll #originalcharacter
    Test print of my Goblin BJD figure design. #gobli Test print of my Goblin BJD figure design.

#goblin #bjdartist #bjd #elastictensionfigure #3d #3ddesign #actionfigures #fantasy #monster #doll #originalcharacter
    I'm working on next months Patreon drop which is a I'm working on next months Patreon drop which is a 15.5cm goblin elastic tension figure. Just needs some additional details, anatomy refinement, and the channels cut for the elastic cord, but is otherwise about done. I'm going to make a few simple goblin weapons like a club and trash sword, maybe a shield, but clothing is optional. I plan to make a more techy goblin for my build, but with a base body like this, there's a lot that can be done. If I get the basic jumpsuit pattern done, I'll add it as well. You can mod it to be separated and into other pieces of clothing. Otherwise just make a simple loin cloth. 😂 Will have the shown grip and relaxed hands which you can print mirrored. More soon.😊

#goblin #bjdartist #bjd #elastictensionfigure #3d #3ddesign #actionfigures #fantasy #monster #doll #originalcharacter
    Just a PSA in case you forget about it, but SGT is Just a PSA in case you forget about it, but SGT is still great putty. (Used to be talc, but it's bad for you) Just mix liquid super glue and corn starch or baby powder. Start with 50/50 and adjust to your needs. Cures fast, faster with accelerator, and the powder makes it easier to sand.
    My printable Rabbit BJD (supported and raw STL fil My printable Rabbit BJD (supported and raw STL files) is now available on my Patreon for only $15! I know a lot of you have been asking for this for some time and now you can print your own. This blue bunny was printed with Siraya Tech Fast White resin dyed with Epoxy Resin Dye. I wet sanded it with 320 grit wet-dry sandpaper, then polished with #000 grade steel wool. Finally a coat of Krylon Matte UV-Resistant Clear was applied. The eyes were painted with a mix of Tamiya Clear and mica powder. Gloss black was dropped in the pupils, then when dry I added a dome of thick clear UV resin and several gloss coats of Krylon. Enjoy!
https://www.patreon.com/posts/67295811

#bjd #elastictensionfigure #rabbit #bunny #doll #arttoy #3ddesign #3d #3dprinting
    Coming this month to my Patreon! You can finally a Coming this month to my Patreon! You can finally acquire and print my popular Rabbit BJD figure!
Patreon.com/FichtenFoo

#patreon #reward #rabbitsofinstagram #rabbit #bunny #bunniesofinstagram #bjd #bjdartist #bjddesign #3ddesign #3dprinting #fusion360 #fichtenfoo
    Don't forget that my 3D printable Akira inspired a Don't forget that my 3D printable Akira inspired army flying platform is expiring on my Patreon soon! Patreon.com/FichtenFoo.
    Reel because reels... Also really happy that she's Reel because reels... Also really happy that she's as articulated as I planned her to be when designing her.

#robot #retro #retrorobot
#gertrude #mech #mecha #android #3dprinting  #3ddesign #3dprinting #autonomousutilitygroup #actionfigures #originalcharacter #fusion360 #loveintheyear3000
    My 1/4 scale Gertrude.D is all done. I designed he My 1/4 scale Gertrude.D is all done. I designed her in Fusion 360, printed her on my Phrozen Sonic Mighty 4k with Siraya Tech Fast resin, then cleaned, painted, and assembled her. 

#robot #retro #retrorobot
#gertrude #mech #mecha #android #3dprinting  #3ddesign #3dprinting #autonomousutilitygroup #actionfigures #originalcharacter #fusion360 #fembot @phrozen3d @sirayatech
    Instagram post 17927971706178064 Instagram post 17927971706178064
    Load More... Follow on Instagram
  • Recent Posts

    • Digital Kit Design » The Okse (32mm scale gaming mecha)
    • Completed » Flocked Rabbit BJDs
    • Completed » Insect Fairies
    • Completed* » Custom 1/6 WipEout Feisar Pilot
    • Digital Toy Design » Rabbit Action-Figure/Doll
    • Art Toy Design » Flocked Cartoon Figures
    • Digital Redesign » Clyde.A2
    • Digital Kit Design » FichtenFoo’s Cantankerous Anglerfish-Shaped Submersible
  • Archives

  • Categories

  • Search

This text can be changed from the Miscellaneous section of the settings page.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, cras ut imperdiet augue.
Powered by Nirvana & WordPress.
Instagram Facebook Twitter Patreon YouTube