Continuing on, I applied medium gray chips to the ships hull using first a small piece of sponge, and later a thin brush for larger areas. Then dry I applied a filter of very thin German Ochre oil paint mixed with odorless turpenoid to warm up the base coat. After…
My paint arrived! So I was able to paint the fins the metallic greenish color I wanted. I achieved the color by mixing Mr. Metal Color Aluminum, Bronze, and Brass. Once that was done, I was able to build and affix the fins to their various mounting points and start…
Since the last update I’ve been applying the various fading, discoloration and rust techniques using oil paints as well as chipping up and aging the chrome finish. First a flat coat of Future Floor Acrylic was applied over all the parts including the chrome. This seals all the prior layers…
I skipped over a few steps with the photography, but I can describe them here. When I left off it was time for additional modulation, but this time with oils. Using 502 Abteilung oil paint I highlighted and darkened areas to give them more depth. The colors I used for…
Here’s the near-completed interior. All I’ve left to do is to dirty-up the floor a bit with a little dust in the corners via a thin oil-paint wash.Seatbelts and consoles were the pre-painted PE that came with the kit. I just had to paint the backs of the seatbelts as…
Progress continues on the BergeLuther. I’ve applied the oil discoloration using the 502 Abteilung oils paints. This time I used the colors German Gray Highlight + Faded Navy Blue, Light Rust, Dark Mud and UN Faded White. These were dabbed on as usual then blended in with clean odorless turpenoid….
![Maude [Cyborg Action-Doll] (Files Only)](https://fichtenfoo.net/blog/wp-content/uploads/2023/01/Maude-Promos-300x300.jpg)
