Continuing with the Frankenstein, I first primed all of the parts with Duplicolor self-etching primer (olive green) then with Duplicolor white sandable primer. I figure that the somewhat dead/decayed flesh is a good place to start so I first airbrushed a gray-brown from the bottom-up to add the shadows, then…
I feel like I never have time to post here anymore. Industria Mechanika keeps me very busy indeed! But here’s my current build-up of the pre-production sample of Adrian Smith’s Frankenstein. (Click Here To Order Frankenstein, Ships 8/7/2012) Normally I don’t build figures, but this one is REALLY awesome. Lots…
I finished up the Kastor a few days ago so here’s the pics of the finished build-up. Overall it went together very well, especially considering it was a preproduction sample. The base is plaster poured thin over plywood then stained with AK-Interactive products. Weeds are silflor horsehair foliage and fine…
I recently was commissioned to do a quick paint-up of the 1/350 Scale Radiant VII resin kit. THis will be on the Starship Modeler table at Wonderfest in a few weeks as a sales display so check it out if you’re there. Same techniques I used for the Millennium Falcon…
The Industria Mechanika/ Kallamity Kastor progress continues with the weathering steps. First up I hand-painted almost all of the smaller details that would need weathering such as vents/piping and additional rust chips. The additional rust was Vallejo applied with bits of sponge. After that I applied a filter of German…
Over the blue and chips I applied another satin coat of FFA, then more hairspray. Over the hairspray I sprayed on several layers of khakis and drabs and then masked and painted the stripes. Oncedone I immediately set to chipping with a stiff wet brush. The resulting chips are not…
![Maude [Cyborg Action-Doll] (Files Only)](https://fichtenfoo.net/blog/wp-content/uploads/2023/01/Maude-Promos-300x300.jpg)
