Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Kinzaa

Pages: [1] 2 3 ... 5
1
Model In-Progress / Wave Release : 1/20 Ma.K Polar Bear - Dio
« on: November 13, 2012, 04:12:09 AM »
A refresher build with no pressure, no time limit, no rules, just me having fun for the last 6 months (started when we sailed out to offshore work installations last June)..... this build is on and off together with the "Briegel" done by Zluca - Kallamity.


Works done on the kit:
* Almost an ootb build, just sculpted the joint w/ 2 part epoxy
* Detailed and modded the head cover ("faux fur" ;-P), added a jacket collar, a scarf and shoulder cushions - main reason behind this mod is that i lost the collar - cover that comes with the kit--- ey more fun for me this way.
*Custom color scheme (just went my own way with this one slinging paint like picasso. hah)


Painting:

* Primer with "primer red" local brand applied straight from the can.
* All handpainted with citadel paints afterwards
* Basecoat mix of dark grey tones
* 2 tone of grey and white- off white's for the primary colors
* mix of yellow's for the id bands / striping
(pardon me for not mentioning any citadel bottle names - I did a lot of custom mix with this one without any control on ratios or whatever, I just went ahead and had fun with it.
* Dio painting goes the same just change the primer to grey.


Here are the images (sorry for the quality of the images, it was take only from my mp3 player, I will post better images once i get back from offshore works.)


Base kit:









Details and Pilot Head mods:





Base/Dio Progress:





More images http://tk07mechworks.blogspot.com/2012/11/wip-wave-120-polar-bear-dio.html

Thanks! Till next Updates

--james TK07

2
Model In-Progress / Re: F.A.T.S.O Walker Type Mech: For InnoKitz
« on: February 24, 2012, 01:39:09 AM »
Hi Guys! Sorry for the late reply, i was busy with alot of things and this is one of them besides my regular work.

@reverend11 thanks for the comment sir, i will finish this one for sure. ;)

@joewhite.
Good question sir, i usually do sketches first for the initial shapes and then build and progress from there, the lineart then the build itself.

here is the small Update:

I got to prime the big pieces, now that i can see all the pieces without the contrasting colors and scratchbuilt parts i can continue to build up details armors as per my concept.






More photos and updates here:
http://tk07mechworks.blogspot.com/2012/02/fatso-update-3.html

Hoping to complete this sooner!
Thanks!

3
Model In-Progress / Re: Pair of Remoras
« on: January 23, 2012, 05:39:39 AM »
Absolutely stunning work Sir! Multiply it by two!

All the vibrant colors even if toned down by weathering really compliments the ships as a whole.


4
Model In-Progress / Re: F.A.T.S.O Walker Type Mech: For InnoKitz
« on: November 09, 2011, 01:56:37 AM »
Additional updates ^_^




 FATSO's 4 inches Pilot.

it is still on the early stages and will need to refine more of the details and symmetry of the pilot, especially the connection of the parts. Including the rifle that will be part of the cockpit area.













Thank you again.

5
Model In-Progress / Re: F.A.T.S.O Walker Type Mech: For InnoKitz
« on: November 08, 2011, 09:02:33 PM »
@Ezechiel, Grail and the greebler elf thank you guys!

@Zluca, thanks! coming from you is a great compliment. Your works are my inspirations for this build. Thank you!

Time for Updates!

Less talk this time...  ;) 

Walker Legs Update:
-Still needs to bulk up the frames and add all the details like cabling, mechanical works and piston for the legs............ and the armors and hydraulic cylinders are still to be attached, this is just the framing..









Mock up of the the lower torso and cockpit area:
(armors and gas tanks still on WIP stage, Pistons, cablings and mechworks still needs to be added on the connections)





That is it for now!

Thank you.
James

6
Model In-Progress / F.A.T.S.O Walker Type Mech: For InnoKitz
« on: October 22, 2011, 01:59:03 AM »
Hi Guys! this will be my resurrection post of some sort, it really has been a long time since my last post (i think it was the AFS dio i made).

This will be the thread for my current build the F.A.T.S.O, a walker type mech in 1/20 scale to be eventually produce as a resin kit. (hopefully the feedback is going to be good).

Me and Alex, my partner in this venture really wanted to produce our own original sculpts / kits for quite some time now and FATSO is the second one. The first one to be release hopefully by December is a 12 inch Figure Resin Kit "Helldiver ARES concept by Theo Stylianides " here is the photo link  http://i210.photobucket.com/albums/bb221/jmrquinsaat/INNOKITZ%20WIPZ/helldiver_ares_by_StTheo1.jpg

And here is the early Lineart for F.A.T.S.O



Done by a good friend in record time. Big shout out to Ansel Jr.. Thanks Bro!

And here ar the early WIPS of the walker project. Combination of kitbash, scratchbuilt and a little sculpting makes up 90% percent of the project. Taking inspiration from the works of Zluca (which i just saw another monster build being crafted), Fichtenfoo's masterful scratchbuilts and tons of Ma.k Builders creating stuffs from anything they find.
 
Lower Torso:










and the early stages of the cockpit /head area:





The main parts for the master is almost all done, except for the main weapons and detailing, which is more fun but time consuming.

Will post more updates in the coming days.

Comments and Suggestions is always welcome.
Thanks for the Visit.


-James


7
Model In-Progress / Re: 1/35 Buchner....YES.....BUCHNER!!^^
« on: October 21, 2011, 05:34:45 AM »
Another Zluca Masterpiece on the production line.. ;).. 8 years is worth the wait i migth add.... keep em' "Z" Detail Crazy Monster MECHS coming Master!

Looking forward to its completion... ( take 8 more years so i can save up.... ahahah)

8
Model Gallery / Re: Completed ยป Chubu Mechatrobot [1:12 scale]
« on: July 24, 2011, 01:06:27 AM »
Another fantastic build, i particularly love the well executed weathering, streaks, stains on this one.
Hope to get one chubu mech on my table one of this days.. but that is likely to be just a dream.

congrats on the completed kit Chief!

9
Model Gallery / COMING THROUGH! : 2011 Ma.K AFS Build (Image Heavy)
« on: April 23, 2011, 05:37:08 AM »
Here is my first completed kit for 2011.







My 1st fig Painting.... ;)


and alot more photos and details:








Thanks for viewing.... See you on the next project ;)

10
Model In-Progress / Re: Luca & Alb project 1: Starship Iguana
« on: October 10, 2009, 10:29:42 PM »
your build put me out of hybernation....hahahah

another one great masterpiece...thank you for sharing....

painting the details on this one will be hardwork... but then again, so does every other work you did ;)

I want me one too... ^_^

11
Model In-Progress / Re: My Briegel N.2- Tournament type use
« on: February 11, 2009, 11:30:01 PM »
 :twitch:wow :twitch: Z your works is nothing short of extraordinary! the techniques learned from your builds is just amazing..thank you for sharing. ;)

cant wait for the final product my friend.

12
uhhmmm shiny! me Likey..... ;) love the vintage look of the batmobile :-)

13
Model In-Progress / Re: Desert-Use Scopedog (1/20)
« on: November 16, 2008, 08:15:04 PM »
wow! this got my full attention, and a nice twist to the design.... (a nice reference for my SD build in the future)

14
Model In-Progress / Re: GUNTHER-Paolo Parente's walker-Heavily modified
« on: September 23, 2008, 09:33:21 AM »
everything has been said..skills, MODS and all, i will wait for the final output and will continue on praising your magnificent works....

15
Model Gallery / Re: PG RX-78-2 ver. nath
« on: September 23, 2008, 04:59:23 AM »
great MODS and build nath....again congrats on the win ;)

16
Model Gallery / Re: NG 1/100 Zaku Phantom
« on: September 17, 2008, 10:39:44 AM »
one of my favorite mech on GS series...hmmm the only one i think from that line, and this work of yours dok just inspired me to do another version of the zaku mariner! seriously!

Love the chest MODS and backpack scheme, panel lines as well...Congrats again on a great solid build

17
Model Gallery / Re: G-System 1/48 Hi-Nu
« on: September 17, 2008, 10:34:56 AM »
Wow..cant imagine working on this guy!...Great build sir....

....hope to build one as good as your work... :-)

18
Model Gallery / Re: MG Crossbone Gundam X-2 Conversion
« on: September 17, 2008, 10:32:11 AM »
Clean and Flawless build sir, and the shotlancer is perfectly executed/ ive seen the WIP's and details you have done.... :twitch: TOPNOTCH

19
Model In-Progress / Re: PKA S1 Dampfrich (MaK zbv 1800)
« on: September 01, 2008, 07:54:18 PM »
this is totally amazing and the rate/speed it was done cannot be explained in words!

Congrats master FF... we all hate you now (in a good way.. :D)

20
Model Gallery / Re: Project Z Ver.Ed (II)
« on: August 01, 2008, 07:55:03 PM »
your work is just in another level......where some of us (including myself) are stretching miles to achieve....wow..congratulations Ed..

Pages: [1] 2 3 ... 5