Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - nath_1977

Pages: [1] 2 3 ... 8
very nice!its been a while since i saw a detailed mecha in progress
and at the same time a diorama.keep it up sir!looking great!

Model In-Progress / Re: Pair of Remoras
« on: February 01, 2012, 09:47:22 PM »
very nice!everything blends well, i like panels with stripe patterns
really made some transitions on your model.yep, rust is beautiful alright. ;)

Model In-Progress / Re: 1/35 Buchner....YES.....BUCHNER!!^^
« on: October 20, 2011, 06:28:33 PM »
wow! the details are over whelming! That serious skill and talent sir!
how i wish i can make a kit like that, keep it up!


Model Gallery / Re: HGUC Rick Dias
« on: June 08, 2011, 07:45:10 PM »
i have to agree on what they said! very nice approach to the kit, the dio
set-up really compliments the overall result.i thought the first image was photo edited, :lol:
great job!

Model Gallery / Re: 1/60 PG LAUNCHER and SWORD STRIKE ver.nath
« on: January 12, 2011, 08:51:27 AM »
thanks bro!the client liked it very much!and for that, he will be giving
me an extra post christmas bonus!hahaha!! :D

Model Gallery / Re: 1/60 PG LAUNCHER and SWORD STRIKE ver.nath
« on: January 02, 2011, 02:42:53 AM »
thanks guys!im glad you like it.i sure do hope that my client
will also like it.Thank you for dropping guys!

Model Gallery / 1/60 PG LAUNCHER and SWORD STRIKE ver.nath
« on: December 31, 2010, 01:17:58 PM »
My commission work is finally finished!just used a point and shoot camera with a very quick
set-up before i deliver this to the client. This is the most detailed and hardest kit i've worked on,
but all effort are worth it.i also added a diorama base for the client. Many thanks to all the people
who supported the project. Lots of pics , sorry no decent tripod at the moment. i hope you guys like it.

a year ender kit for me! Happy new year to all!

more pics here:

Strike gundam, the base kit

Launcher Pack with its BFG, sorry i have to be careful with the posing to avoid
paint scratch, standing pose at the moment.

Sword pack, again standing pose for the moment to assure the client
will receive this 100% no-scratch

Holding both the Launcher and Sword pack weapon system

some random close up, i just like those details i made..hhaaayyy..

some dio base shot

for more photos, kindly click this :

thanks guys!i hope you like my kit.
til next time.


Model In-Progress / Re: PG LAUNCHER STRIKE ver.nath
« on: August 09, 2010, 07:06:27 PM »
thanks of the GM can be found here :

Model In-Progress / Re: PG LAUNCHER STRIKE ver.nath
« on: August 09, 2010, 01:07:35 AM »
hi again!short cut....pla struct beams and c-beams are quite expensive
and very rare nowadays thats why i decided to mass produce my own size
and simple truss design.i began consructing a simple scale member like this one
which also served as the master copy. its really hard to mimic a crsip and very smooth
resin result. :unsure:

and made a master mould like this one..make that 2

..and tada!!..viola..instant copy..though you have to wait for the (industrial) resin to cure, needs cleaning!

while producing the number i need, let them sleep in a tub of dishwashing liquid w/ water

That's it for now!

slowly but ...slow.hahah!!!


Model In-Progress / Re: WIP : MG POWERED GM ver nath
« on: July 26, 2010, 07:31:55 PM »
Thanks sir, for a changed i erased that big 'x' mark on its knees and made it
into panel liking it so far.  :D

Model In-Progress / WIP : MG POWERED GM ver nath
« on: July 25, 2010, 10:12:52 PM »
hi!while waiting for some materials for me to continue with the PG strike
im working on, heres a fun build for me.i've been really busy from the past
few days with sidelines and stuffs, i needed a non-stress kit build for myself
so i ended up with my version of RGM 79 type C powered GM.
This was an old project and The parts are scraps and left over from my spartan
combo kit, so what i did was to use them and gave them new life..whew!
I erased some panel lines and gave it new look especially the calves parts.

Some Modifications and touch ups:
- scratchbuilt shoulder connector
- improvise head (glass) visor from clear plastic plate and sculpt head internals
- scratchbuilt chest details.
- recast powered gm calves
- new panel lines/scribe

some touch ups and sanding are needed, and few minor details will be added later
on but this is basically finish.this was an on and off project,next would be painting.

Primed Parts :

so what do you think guys?

- nath

Model Gallery / Re: RX-77D GUNCANNON mass prod ver.nath
« on: July 13, 2010, 12:57:31 AM »
thanks sir!i like under rated kits especially hguc line up, makes lot of room
for improvement.thanks for dropping!

Model Gallery / RX-77D GUNCANNON mass prod ver.nath
« on: July 11, 2010, 07:20:06 PM »
hi guys! heres a kit i made last 2009, which i took shot
with my ol' handy dandy camera (pardon the grainy pics)
nothing much, just wanted to do this kit for a long time.
i didnt alter the color scheme, red is fine with me. The goal
of this exercise is to flex its mobility and articulation up to its
maximum potential (sounds cool ..hehehehe)

modifications i made:
- arm and shoulder articulation
- chest and torso mobility
- cannon mods
- custom decals and markings
- alter of manipulators

thats it! i hope you like it.


so, what do you think guys?

- nath

Model In-Progress / Re: PG LAUNCHER STRIKE ver.nath
« on: June 30, 2010, 11:23:06 PM »
thanks guys!i prefer to hand paint those super little items than to AB them, makes masking
a bit less in the pain.thanks again!

small updates with more decals!

first look at the shoulder...err..something..whatever it is called..
decals are from different kit, ..why not..looks kewl!
the yellow mask is to avoid the metallic finish to be oversprayed with flat
later on, some parts are not attached yet.

the decaled tanks at the front end of the BFG

an overview of the BFG, still missing parts not yet attached

here are the un-attached parts

chest decals

front skirts

arms and sides

first look of overall test fit, needs  final coat of yummy flat coat

i really need to get a new camera...hhaaaayyy..
pls bear with the pics ok?

- nath

Model Gallery / PG RX-78-2 ver. nath
« on: June 23, 2010, 08:28:22 PM »
hi guys!
This is an old kit i made last 2008, i decided to re-shot them because
the first i did looks very crappy..i hope i did justice in taking new shots.
i hope you like it!



Model In-Progress / Re: PG LAUNCHER STRIKE ver.nath
« on: June 07, 2010, 01:47:27 AM »
thanks guys for those warm and interesting comments. :D

hi guys!been very very busy lately, my PG update is sure is slow.
im in the decaling stage at this moment, and will be putting more.
i'm still outsourcing some decals to fit in the strike and the launcher gun.
it's a coincidence that the color scheme my client pick has somehow some similarities
with master erix pg strike..woah!..anyway, mine is a bit darker in shade and the grey tone is
a bit darker too with white mixture.i hope i can decal this kit and finish it
before the month ends because i want to start another for my own.
enough blah blahs..onto the pics!

Sorry for the Grainy images, too much image enhancement  #-O  @-)
Other metallic parts and accessories were not shown since it will be finish in
matte, we dont want to take away the bling bling effect do we?  :P

gloss coated/panel lined :

side armor detail



thats it for now guys...wheew!

- nath

Model In-Progress / Re: PG LAUNCHER STRIKE ver.nath
« on: May 10, 2010, 06:23:35 PM »
@ Asmodeous
- thanks sir for dropping by, a rivet-er....umm..actually i just called it that name  :lol: because i dont
know what it is it can simulate rivet marks with constant distance, its just like a slicer for cutting pizza ,
i'll take a pic later. thanks!


the base was too simple for me so i decided to put some minor details,
the base will feature a standing figure and a small control aparatus with working
LED lights to highlight the standing mecha.

close up

simple lighting gimick

im also in the painting stage, so stay tune for more updates!

what do you think ?

- nath

Model In-Progress / Re: PG LAUNCHER STRIKE ver.nath
« on: May 04, 2010, 06:07:30 PM »
thanks guys!i used mr.surfacer for my primer

painting update / Base :

painted the internals individually with gaia custom dark gray (sorry blurry pics)

gaianotes rock!

painted the hydraulics and metals with gold gaianote colors (sorry blurry pics)

metals in starbright silver (sorry blurry pics)

Simple Custom Dio base for the monster, with lighting effects
made it in leass than 2 hours then primed it the same day

i used a rivet-er to scribed rivets..

thats it for now.

What do you think?

- nath

Model In-Progress / Re: PG LAUNCHER STRIKE ver.nath
« on: April 07, 2010, 12:50:00 AM »
thanks grail!i used a brass rod from wave, though i forgot what diameter was it..its the thinnest
i one i used., and ' msg combo ' is just a term i used to combine different kotobukiya detail up parts.
thanks for visiting!

Model In-Progress / Re: PG LAUNCHER STRIKE ver.nath
« on: April 06, 2010, 04:18:24 PM »
thanks!nope, im not going for the traditional green, its more on the tone of grey and blue.
i want it to look like its really part of the kit. :-)

Pages: [1] 2 3 ... 8