Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - AkoHobby

Pages: [1] 2 3 ... 12
1
Model Gallery / Re: MSV ~ 1/100 MG GunCannon 4 conversion
« on: December 02, 2011, 05:57:18 PM »
Excellent paintjob, there's a lot of detail here. I see some weathered metal plates under the knee armour that you really only see if you bend the leg, but they look sweet!

actually i tried to give a weathered look allover but the effect is too subtle... :(

2
Model Gallery / Re: MSV ~ 1/100 MG GunCannon 4 conversion
« on: December 02, 2011, 05:54:42 PM »
Say this is a resin cast or a custom model? I really like the mods with the riflle and the aiming device. What did you use for the lenses?

this is resin cast parts developed from us using (80% automation + 20% craftmenship). The lenses are aurora stickers which we will be included in the kit.

3
Model Gallery / MSV ~ 1/100 MG GunCannon 4 conversion
« on: November 25, 2011, 06:16:23 PM »
Hey Guys, hope you are all doing well. I (Albert) haven't been posting here for a long time. I just finished up this RX-77-4 for  AkoHobby. Pretty good one if you are a fan of the original MSV fan. Just stay tune with AkoHobby FB for the release date  ;).











Enjoy!

4
Capitalism Corner* / Re: News From AkoHobby
« on: August 10, 2011, 12:40:29 AM »
That's part of the project. You will see the EZ-8 for sure by end of this year. It's half way done.

5
Capitalism Corner* / Re: News From AkoHobby
« on: August 08, 2011, 05:43:11 PM »
Sorry guys. I should have mentioned this is a conversion kit based on MG ground type gundam from the 08th MS Team. You can drop your pre-order request to sales@akocreation.com with your FFForum login ID.

thanks!
Ken

6
Capitalism Corner* / Re: News From AkoHobby
« on: August 07, 2011, 11:06:40 PM »
Special Release - 1/100 resin cast Ground Type Gundam from private progress. 

We will be offerring the kit to board member here by end of next month. The product will not be listed on the website and it is a one time deal with special arrangment with the owner of the kit.

From today to end of Aug, we will start to take pre-order. The price is USD80/set.
Metal Parts, PE set#1, Aurora stickers will be included.


http://www.akocreation.com/modelshow/work/RX-79G/RX79G3.JPG
http://www.akocreation.com/modelshow/work/RX-79G/RX79G4.JPG
http://www.akocreation.com/modelshow/work/RX-79G/RX79G5.JPG
http://www.akocreation.com/modelshow/work/RX-79G/RX79G6.JPG
http://www.akocreation.com/modelshow/work/RX-79G/RX79G10.JPG
http://www.akocreation.com/modelshow/work/RX-79G/RX79G7.JPG
http://www.akocreation.com/modelshow/work/RX-79G/RX79G8.JPG
http://www.akocreation.com/modelshow/work/RX-79G/RX79G9.JPG
http://www.akocreation.com/modelshow/work/RX-79G/RX79G11a.JPG
http://www.akocreation.com/modelshow/work/RX-79G/RX79G12b.JPG

7
Capitalism Corner* / Re: News From AkoHobby
« on: July 16, 2011, 09:45:12 AM »
FIXED!

8
Capitalism Corner* / Re: News From AkoHobby
« on: July 15, 2011, 08:45:26 AM »
coming soon in end July. PE set#1 for gunpla detail up.



This PE is to replace rthe metal transfer that sold out a while ago. In the past we receive comment that the transfer is too shiny and that the glue isn't strong enough on semi-gloss or matt surface. Therefore we figured to change to PE and give more thickness and sharpness to the parts.

9
Capitalism Corner* / Re: News From AkoHobby
« on: July 12, 2011, 11:46:02 PM »
Just want to introduce myself. I am Ken from Akohobby. My partner Oscar who used to manage this thread in the past but he will now concentrate on order management of our online store. So for the slow response in the past months.

10
Capitalism Corner* / Re: News From AkoHobby
« on: July 12, 2011, 11:32:10 PM »
What would the base kit for the Blue Destiny be?

Sorry for late as we were tied up with some internal changes. you will need either the ground Gundam or ground GM for the base.



11
Capitalism Corner* / Re: News From AkoHobby
« on: July 12, 2011, 11:30:21 PM »
Like your stuff a lot.
I'm a little confused about the chisel bits. http://www.akocreation.com/pages/metalparts.html#
It seems that one package isn't available until September,but the other exact package is available now,and 50 cents cheaper? Is it the .5mm set offer that makes the difference? This is something I could use.
cheers.

there are 2 different things if you check out the photos :). Those are for different purpose.
It is not related to the 0.5mm set but the production cost that make the price difference. 

12
Capitalism Corner* / Re: News From AkoHobby
« on: April 14, 2011, 10:37:45 PM »
If anyone of you are serious about getting the following kit again please drop us a message by April 27th to sales@akocreation.com

1. Blue Destiny conversion kit, 2 in 1 $95
2. EfreetEfreet Custom conversion kit, 2 in 1 $120.

We are trying to organize a group purchase with the owner of these kits (the master copy). If successfully gather 10 sets for each the owner will run another batch and you can expect 10% off.

13
Capitalism Corner* / Re: News From AkoHobby
« on: February 22, 2011, 05:11:54 PM »
Cool. I recommended about 200 friends for ya the other day. That'll help you get the word out. :lol:

Thanks man. I was busy clicking them the other day.

The connection to facebook in China is not stable though. It was offically blocked here and so I have to use a software to help us get through the wall. I am glad we finally able to facebook now. 

14
Capitalism Corner* / Re: News From AkoHobby
« on: February 21, 2011, 10:19:04 PM »
website updated with pre-order info for the ground GM now. We will drop the idea to add more parts for the sniper portable energy charger.

Also we have opened a facebook acoount Ako Hobby, join us for more instant updates and special promotions.

16
Capitalism Corner* / Re: News From AkoHobby
« on: February 08, 2011, 06:57:05 AM »
The kit can be used on the sniper version without problem. what we are considering is to add a portable sniper rifle energy charger to the sniper back pack. We are waiting for the proto by end of Feb to see the appearance. Right now we are drawing cad.

17
Capitalism Corner* / Re: News From AkoHobby
« on: February 07, 2011, 08:18:54 PM »
We are about to release the 1/100 resin cast MG RGM-79[G] upgrade kit by end of March.
Special pre-order for board member here will be started by Feb.



Parts list for RGM-79[G]

Head
Resin x 2
Transparent x 1

Upper Body
Resin x 4

Lower Body
Resin x 6

Shoulders & Arms
Resin x 12

Legs
Resin x 28

Back Pack
Resin x 2 (for standard type – orange)

Resin x 5 (for sniper type – green) - still under consideration.

Gun barrels and thrusters
Metal parts X 8

others
Aurora sticker X 2
Aurora sheet X 1

Retail price: USD80.00 

You will need the MG RGM-79[G] from the 08th MS Team series for this upgrade kit. You will require full internal MG frame. The design also allow you to keep the original feet if you happen not liking the more ka style feet.



For pre-order, you can receive 20% off with down payment before March 15th. After that there will be no discount offer. We will update our website later.



18
Model Gallery / Re: 1/35 Tamiya Sd. Kfz. 222 (DAK)
« on: January 01, 2011, 07:24:58 PM »
hey Al, great work here. I guess you have to build gundam kit again for us...haha

19
Model Gallery / Re: 1/72 G-System MSN-06S Sinanju
« on: December 10, 2010, 02:53:49 AM »
great work here! I alway can't find the courage to get into those gaint resin kit... It would have took me a year just for sanding :P

I am surprise to see the armor can be taken off to display the frame. must be a quality kit!

20
Capitalism Corner* / Re: News From AkoHobby
« on: December 07, 2010, 08:34:39 AM »
new tools for scribing circle - Dec 20th release!

1. CS Chisel - 2.0mm X 3 Retail $3.00/pack
2. CS Chisel - 1.0mm X 3 Retail $3.00/pack
3. CS Chisel - 1.5mm X 3 Retail $3.00/pack
4. CS Chisel Combination Set (1.0mm X 1, 1.5mm X 1, 2.0mm X 1) Retail $3.50/pack

they are compatible with handles from different brands
(handle not included)



youtube video
http://www.youtube.com/watch?v=FYNKmzqfofU

Pages: [1] 2 3 ... 12