Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Asmodeous

Pages: 1 [2] 3 4 ... 7
That thing looks mean as Hell.  I notice the hips have ball joints as well.   Will the knees and ankles be pose able?   This is something I might want.

Model In-Progress / Re: MG Wing Gundam
« on: May 09, 2010, 09:07:03 AM »
Looks like a nice kit but it just lacks some much needed detail.  I think it needs a few additional panel lines and such.  That is just my opinion though.

Model In-Progress / Re: PG LAUNCHER STRIKE ver.nath
« on: May 06, 2010, 04:56:53 PM »
I love the base.  What is a rivet-er?  Otherwise very nice.

Model In-Progress / Re: Fullscratched fighter
« on: April 18, 2010, 05:08:14 PM »
Some planes have large landing gear...  Of course you could just loose the gear and go with a flying pose maybe at a slight upwards and right turned angle as if the aircraft is beginning a bank. 

Model Gallery / Lighthouse
« on: April 17, 2010, 06:47:49 PM »
First off I know it's not a traditional model.  But it technically is a model that I built.  I am better at larger things that I can use real screws and metal on.  The top is a fixture from a lamp post.  The middle section is 2 sections of galvanized sheet metal pop riveted together.  The wood on top is treated plywood.  I had some problems during painting with paint coming off with the masking tape.    Any and all C&C welcome.  If this is in the wrong section please move it. 

I agree with Picster on the final scheme at the bottom right.  As far as the model posted... Awesome!  I live the skulls, the blood on the teeth/fangs, the colors, the water... just awesome.  Looks like someone walked in on it in it's subterranean cavern lair. 

Model In-Progress / Re: PG LAUNCHER STRIKE ver.nath
« on: April 06, 2010, 02:48:20 PM »
Can't wait for paint on this guy.  Are you going with the traditional green for the launcher parts? 

Model Gallery / Re: 1/100 MG Efreet Brothers part 1 (Efreet Custom)
« on: April 04, 2010, 07:50:06 AM »
WOW this looks awesome!  Can't wait to preorder mine.

Model In-Progress / Re: Markov WIP!
« on: March 27, 2010, 07:51:55 PM »
I am not sure what the bottom of the car looks like nor am I sully sure how the magnet looks exactly.  From the first picture it looks like a ring with no center.  Anyway what if you cut out the bottom of the car, mount the magnet as flush as possible in that area and then smooth out the edges.  It's not going to be completely visible and wouldn't require extensive modification.  Just my thoughts.  I would love to have one of those bases for a Babylon 5 Starfury that I have but I don't have the $100 bucks to shell out or it.  Maybe later.

I imagine modifications on something that large would be a little easier (least for me as I'm used to welding and working with larger pieces of wood) and could use things stronger than plastic.  Also seeing as it's not super expensive I can understand the benefits.

Capitalism Corner* / Commission
« on: March 03, 2010, 06:20:29 PM »
Hey people.  I have a PG Wing Zero Custom sitting in it's box on my shelf.  I don't really have the time nor the experience to work on this and make it look like it should.  I would prefer someone in the US (cutting down on shipping costs) but if I can get someone from outside the US for a reasonable price maybe we can deal.  The build I want is simple (or so I think). Stock colors, pre-shadeing, panel lines, minimal decals (few warnings), internals, and the ability to mount on an 1/8 inch brass rod (if that will support it).  Thanks to any and all for reading and considering.

Capitalism Corner* / Re: WTB/Borrow Gundam DVDs
« on: March 02, 2010, 04:24:32 PM »
Noticed no one had noticed  Just run a search.

Model In-Progress / Re: 1/100 MG RX-93 Nu Gundam
« on: February 27, 2010, 08:48:58 AM »
I may be wrong but I thought I noticed some red visible on the inside of the left arm in the first pic.  If so is that going to be visible later?  I like it so far.

Model Talk / Re: Model Wishlist (Something stupid for a change)
« on: February 25, 2010, 05:30:40 PM »
I have to agree with most of you. 

MG Hazel
MG Wing kits (Endless Waltz or otherwise)
MG Virgo (heck just a 1:100 Virgo would be awesome)
MG Kampfer 2.0

Model In-Progress / Re: MG GM Custom - Ruby Guard
« on: February 25, 2010, 02:27:28 PM »
Loving your work.  You've given me a lot to go with while I tinker with my MG Quel.  Had some of the same ideas but haven't really put forth a tremendous effort to improving and implementing them.  Can't wait for paint to see how it looks.

Model In-Progress / Re: Abandon Chute HH-1N
« on: February 15, 2010, 06:28:45 PM »
Awesome work as always.  Nothing but the greatest which is what we have come to expect from a master of your caliber.

Model Gallery / Re: 1/35 Lionroar BMW R75
« on: February 10, 2010, 07:10:21 PM »
Out of box....  That thing came in a box???   What else came in that huge box?  Man that thing is tiny...  Great work.

Capitalism Corner* / Re: News From AkoHobby
« on: February 09, 2010, 06:22:02 PM »
OMG!!!  That looks awesome!!!!  Good thing I have 2 Gouf Customs....

Model In-Progress / Re: Abandon Chute HH-1N
« on: February 08, 2010, 05:56:11 PM »
I wish I could.  The military gets slightly upset about people with cameras taking pictures around any of their equipment especially hangers and aircraft.  Something to do with homeland security. 

Model In-Progress / Re: Abandon Chute HH-1N
« on: February 07, 2010, 01:39:00 PM »
Awesome details.  I'm a civie and get to work on the flightline at New River MCAS in Jacksonville NC .  I love seeing the Huey's, Cobras, Super Stallions, and Ospreys flying all over.  Looking forward to this one.

Pages: 1 [2] 3 4 ... 7