Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Jonkokyan

Pages: [1] 2 3 ... 5
Model Gallery / Re: MG MSN-06S Sinanju
« on: June 16, 2009, 10:28:45 PM »
I used Mr Color Gold #9 for the gold parts.

Model Gallery / MG MSN-06S Sinanju
« on: June 10, 2009, 03:13:55 PM »
This guy has lot of decal. Fortunately, the gold parts are easier than I thought. No need to be an expert, but just time consuming.

Any comment will be welcome. for more pictures.
Thank you

Model Gallery / MG RX-93-V-2 Hi-V Gundam
« on: June 10, 2009, 03:04:59 PM »
Any comment will be welcome. for more pictures.
Thank you

Model Gallery / MG MS-06S Char's Zaku II Ver. 2.0
« on: June 10, 2009, 02:55:32 PM »
Any comment will be welcome. for more pictures.
Thank you

Model Gallery / VF-0S with Ghost Module
« on: June 10, 2009, 02:51:55 PM »
Any comments will be welcome. for more pictures.
Thank you

Model Gallery / RB-79 Ball
« on: April 22, 2007, 04:43:15 PM »
This mg ball has nothing special, just painted it. Is that call OOB? I did a very bad job on the decals :(, hope going to do better next time.
I finially made a light box, and it improves the quality of the pictures.
Any comment will be welcome
Thank you

Model Gallery / Re: XXXG-01W Gundam Wing
« on: April 17, 2007, 09:08:20 AM »
Thanks for the comments.
For the pictures, I just don't have the the talent to take good pictures. I need to find a way to improve. Is there any tutorial that teach how to set up and take pictures for models?
I would like to do more posting but that kit is very fragile and it is easy to damage the paint. Maybe I am too violence to my kit, I always damage my kits when I touch them. So I try to avoid touching it as possible.

Model Gallery / Re: 1/144 Asshimar Ver.Ed
« on: April 17, 2007, 08:56:33 AM »
Too beautiful, can't believe it, too nice to be true!

Model Gallery / XXXG-01W Gundam Wing
« on: April 15, 2007, 05:19:12 PM »
Finished it two weeks ago but I had no time to take pictures because I needed to study for my final exams. Anyways, that kit has nothing special, the color scheme is slightly different then the original color scheme. That color scheme is coming from the Gundam W Endless Waltz Film Comics book ( I just modifed the arms a little so that it can hold the shield on the side and the rifle's magazines on the back. I also modified the rifle a little bit. The color scheme of the base is very similar to the one that Orange made because I copy off from him. Thanks to Orange that he let me copy his. Here are the pictures. Comments will be welcome. Thank you
Wing Gundam
The Base

Model Talk / Re: One Guess: 100th MG
« on: April 07, 2007, 06:54:20 PM »
I guess MG GP03S Dendrobium Orchis or GP04.

I have a question about how to protect the water slides decals? I bought the Bandai water slide decals for my mg Strike Freedom and mg Hi-V gundam. However, I will not build them shortly, and I am worry that the white color of the water slide decals will turn yellow. I already put them in to a Ziploc bag. I want to know is there any other additional thing I can do to prevent the white turns yellow?
Thank you

Model Gallery / WAVE 1/100 LED Mirage wit Boomerang SYS (Commision)
« on: August 30, 2006, 09:56:03 AM »
Erix, are you human? This is insanely awesome. A normal human can't do this.
I think your client asked too much. You mention before that all the movable joints are glued with superglue, and he requests a kneeling pose. But you still able to give it a kneeling pose. This is unbelievable.

Model Gallery / Mg Griffon Flight Type
« on: August 30, 2006, 09:42:20 AM »
Nothing special, just painted it. I feel that paint and non paint do not have a big different. But for sure, it is better than not painting it. I fixed the major seam lines on the arms and the legs.
Comments will be welcome.

Thanks FF for your quick reply. Your suggestion helped so much. The screw is not strong enough to hold the wings, I tried it already :( . I will paint the joints to thicken them up, and I hope it will work. I forgot to ask a question. FF, What kind of flexible paint you used to paint the vinyl joint covers. I have no experience at all on those flexible paint. Also, do I need to prime those vinyl joint covers?
Thank you very much

I just started to build the MG Griffon. How can I remove the seam and flash on the Vinyl Joint Covers? I read the in progress thread of FF's Griffon. FF said that he uses a solder iron to remove it. Is it possible to give me some more information of how to use the solder iron to remove those seams and flash? Another problem that I am facing is that the wings of the griffon is too heavy and the joint that connect the wings and the back is very loose. How can I solve this problem?
Thank you very much

Model Gallery / MG Sazabi
« on: July 29, 2006, 11:43:18 AM »
Thanks, for your suggestion FF. I will put the painted pictures first and the non painted pictures last  :). I will try to take the photos again, but my camera has no more battery and I lost the charger  :( . I hope I can find it as soon as possible. I having trouble to take some clear pictures, I hope I can find a way to improve it.

Model Gallery / MG Sazabi
« on: July 29, 2006, 11:07:57 AM »
There it is
Any comment will be welcome.

Model Gallery / VF-1S Strike Valkyrie
« on: May 29, 2006, 10:56:14 AM »
I am very happy that you guys like my VF-1S. Thank you very much :D.
So Funaka, if I did not misunderstand what you said, you mean Tamiya glue is for eliminate seams, super glue is for final assemble if the kit is required, and tube model glue is for the little parts? Also I think super glue can be used as a putty. Am I right?

If I remember correctly, someone put a link of a Hong Kong site which sale decals. I can't find it. Can someone post it again please .
Thank you very much

Model Gallery / VF-1S Strike Valkyrie
« on: May 27, 2006, 09:14:20 PM »
The stand fits VF-1S, YF-19, and YF-21. Hasegawa design this display stand for Macross kits in 2002, and the Macross Zero kits are after 2003, so I am not sure if it will fit  Macross Zero kits. Anyways, here is a picture of it:

Pages: [1] 2 3 ... 5