Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Asmodeous

Pages: [1] 2 3 ... 7
1
Model In-Progress / Re: Junkyard 'Dog
« on: August 08, 2011, 05:21:57 PM »
No prob.  In my mind I'll just make it detachable as to conform with my brain.  Heh  Great work though.

2
Model In-Progress / Re: Junkyard 'Dog
« on: August 07, 2011, 09:33:12 AM »
I know I'm a little late but I have a question.  The ladder looks odd in the front.  Couldn't a simpler ladder be added to the backpack?  Like an aircraft ladder.  A simple single leg with rungs alternating on each side.  Same figure would work but it wouldn't interfere with the movement and detract from the front of the mech and would add a little to the back.  Just my 2 cents.

3
Model In-Progress / Re: MSM-03 Gogg 1/100th scale Master Grade
« on: August 02, 2011, 06:31:43 PM »
Looking good.  Can't wait to see it finished.

4
Model In-Progress / Re: Junkyard 'Dog
« on: July 27, 2011, 04:34:58 PM »
I love what you've done so far but was thinking of something that I don't see.  Patches and other "add-ons".  I would think that something like that would have a couple of plates welded here and there patching spots.  Things like a light here or there would seem like something that a worker would add to their equipment.  Another thing is that if the owner added the mask and the loop to hold the cable then they wouldn't be as rusted as the rest of the suit.  Just my 2 cents.  I still really like it and look forward to the completion.

6
Looks alright.  The head looks weird along with the thighs.   The rest looks good.

7
Food coloring can be used as mentioned here: http://fichtenfoo.net/blog/custom-clear-colors/  I was asking a slightly different question.  FF has mentioned simply using a cotton ball to apply the plain un-thinned future and I was curious to know if future with food coloring can be applied in this manner.  Thank you for your answer.

8
After reading the entire post I have a new question.  I have heard you can create your own custom clear colors using FFA and food coloring.  Does this mixture have to be sprayed with an airbrush or can it be applied with a cotton ball like plain FFA?  On a similar note does anyone know anyway to make a clear "smoke" color with the food color and FFA blend?  Thanks in advance.

9
Capitalism Corner* / Re: MechaSkunk Web Store Update Thread
« on: February 09, 2011, 06:31:11 PM »
Just my 2 cents, after receiving my feedbelt chain I believe the 8 mm seems to be the closest in size to the rubbery part that comes with the kit.  The 6mm fits inside the slot but isn't quite as large. Again just my 2 cents.

10
Model In-Progress / Re: G-System 1/35 EX-S - commission
« on: February 01, 2011, 07:20:48 PM »
I don't know what makes me feel worse about my life... The fact that someone has the money to first afford to buy all of these kits, then ship them to you, then pay you to assemble them into true works of art, then have them shipped back to themselves...  or the fact that after paying for all of this they can afford a cavernous space somewhere to display them....  I'm obviously in the wrong line of work.

11
I still want a Virgo...  Why can't we get a mobile doll.....

12
Model In-Progress / Re: 1/72 RGM-79SP3 GM Sniper III by G-System
« on: November 27, 2010, 10:10:34 PM »
I've always loved this design.  Can't wait to see what you do with it.

13
WOW  That looks AWESOME.  I keep hoping they will make a MG out of this.  I can't afford the bit resins nor do I have the ability and time to do one justice.  Yours looks very nice so far.

14
Model In-Progress / Re: 1/100 Cairn Freya
« on: August 18, 2010, 03:34:10 PM »
WOW...  Looks really awesome. Lots of tiny detail and awesome scratching.

15
Model Gallery / Re: STRIKE GUNDAM + I.W.S.P.
« on: August 13, 2010, 07:05:27 PM »
Looks good for your first kit.  Just a couple of small things that I saw.  The back of the kit (the yellow in he 4th pic down) is too clean as compared to the rest of the kit.  Secondly the seams on the shoulders are visible in the 9th pic down.  Other than those small things it looks good.  Congrats

16
Model In-Progress / Re: PG LAUNCHER STRIKE ver.nath
« on: August 09, 2010, 04:28:01 PM »
Nice.  A person can really learn a lot on here.  I also like the GM in the background.   Any more pictures of it?

17
Model In-Progress / Re: Improving the 1/100 Nataku
« on: August 04, 2010, 04:22:41 PM »
I agree that the legs are atrocious.  Maybe bash a set of legs from a MG with the armor from he Nataku.  The feet look good maybe the ankles need could be lengthened. Cut the point off of the thigh and maybe ad a joint to he knee.  Maybe..

18
Model In-Progress / Re: Tamiya 1:72 scale F/A-18 Hornet
« on: July 24, 2010, 09:27:05 PM »
Yea that is the training model.  More or less the A and C models are single seaters used in combat where as the B and D are double seaters used mainly for training purposes.  I see a few of those on Cherry Point MCAS here in North Carolina.  Looking forward to what it looks like when you finish.

19
Model In-Progress / Re: Tamiya 1/32 A6M2 Zero
« on: June 30, 2010, 07:11:17 PM »
Wow loads of details in the guages.  Looking forward to the finale.

20
Model In-Progress / Re: Tamiya 1/32 A6M2 Zero
« on: June 28, 2010, 06:03:24 PM »
Wow  looks awesome so far.  Nice detail on the engine pity there isn't a compartment that can be opened to show the details.

Pages: [1] 2 3 ... 7