1
Capitalism Corner* / Re: FS: Resin, vinyl, injection.
« on: October 03, 2015, 10:42:37 AM »Offers on what?
If the price tag is too steep for you, make me an offer
Perhaps the kits I am selling, or didn't you notice the list above?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
If the price tag is too steep for you, make me an offer
Perhaps the kits I am selling, or didn't you notice the list above?
2
Capitalism Corner* / Re: FS: Resin, vinyl, injection.
« on: September 29, 2015, 10:28:17 AM »
Sold kits removed.
Open for offers, but keep it civil
Open for offers, but keep it civil
3
Capitalism Corner* / Re: FS: Resin, vinyl, injection. Lady Slave, Takeya and more
« on: December 04, 2014, 03:33:26 AM »
SOLD KITS REMOVED
Sttill a few gms there .. Xmas is approaching ..
Sttill a few gms there .. Xmas is approaching ..
4
Capitalism Corner* / Re: FS: Resin, vinyl, injection. Lady Slave, Takeya and more
« on: December 01, 2014, 11:54:52 AM »
Sold kits removed, info updated.
5
Capitalism Corner* / FS: Resin, vinyl, injection.
« on: November 29, 2014, 02:39:46 AM »
Cleaning up my stock.
Exact shipping to be determined by location.
Paypal or bank transfer.
All kits are untouched.
Wonder Show Case (Kaiyodo) 1/4 Chun Li (Street Fighter) Bust $200
ArgoNauts 1/8 Dracula & Mina (vinyl) $75
Doyusha 1/24 Aston Martin James Bond with figures, injection plastic. Box has shelf wear $95
Wave 1/24 Ghost in the Shell S.A.C Tachikoma, injection kit. $30
Bandai Non scale (about 1/144) EVA-01 w accesories, injection kit $40
Yamato 1/8 Hellsing Seras Victoria (WF special resin kit) $175
Chuck Nedham's 1/6 Nancy (Sin City; Jessica Alba), released by Mad Dog Resin $130
Fewture Models 1/6 Avira, sculpted by Yuji Oniki, resin $200
Max Factory 1/6 Cyber Ninja (Takeya), vinyl $100
Sam Greenwell nonscale Chaos Lord bust (horns not in pic) resin $50
Overdard 1/8 Ivy from Soul Calibur, resin $95
Range Murata 1/8 Trinode (WF special), resin $95
Range Murata 1/10 Tatiana Wisla (Last Exile) by Amie Grand, resin $60
Chuck Nedham's Playful Mk 2.0 by Mad Dog Resin, Bettie Page and comes with alternate head as shown in pic. 1/6, resin $145
Pagan Art's The Exorcist (Max von Sydow) bust 1/4 resin $45
FB Photo album <--- *click*
Exact shipping to be determined by location.
Paypal or bank transfer.
All kits are untouched.
Wonder Show Case (Kaiyodo) 1/4 Chun Li (Street Fighter) Bust $200
ArgoNauts 1/8 Dracula & Mina (vinyl) $75
Doyusha 1/24 Aston Martin James Bond with figures, injection plastic. Box has shelf wear $95
Wave 1/24 Ghost in the Shell S.A.C Tachikoma, injection kit. $30
Bandai Non scale (about 1/144) EVA-01 w accesories, injection kit $40
Yamato 1/8 Hellsing Seras Victoria (WF special resin kit) $175
Chuck Nedham's 1/6 Nancy (Sin City; Jessica Alba), released by Mad Dog Resin $130
Fewture Models 1/6 Avira, sculpted by Yuji Oniki, resin $200
Max Factory 1/6 Cyber Ninja (Takeya), vinyl $100
Sam Greenwell nonscale Chaos Lord bust (horns not in pic) resin $50
Overdard 1/8 Ivy from Soul Calibur, resin $95
Range Murata 1/8 Trinode (WF special), resin $95
Range Murata 1/10 Tatiana Wisla (Last Exile) by Amie Grand, resin $60
Chuck Nedham's Playful Mk 2.0 by Mad Dog Resin, Bettie Page and comes with alternate head as shown in pic. 1/6, resin $145
Pagan Art's The Exorcist (Max von Sydow) bust 1/4 resin $45
FB Photo album <--- *click*
6
Model In-Progress / Terminator diorama
« on: March 22, 2014, 02:03:06 PM »
First time in more than 2 decades since I touched syrene kits, so .. well, it'll be interesting.. ^^
I am dead lazy and can't be bothered with a photo hosting service right now, so I'll just link to my (official) Face book album
I am dead lazy and can't be bothered with a photo hosting service right now, so I'll just link to my (official) Face book album
7
Model News Feed / Re: Derek Stenning's Dystopic (1/6)
« on: August 31, 2012, 01:27:31 PM »
This is so beyond Beautiful...
You have truly pushed the boundries between kit and art out of the equation...
You have truly pushed the boundries between kit and art out of the equation...
8
Model In-Progress / Re: Adrian Smith's Frankenstein by Industria Mechanika
« on: August 08, 2012, 10:44:06 AM »
Subtle hints of greens and blues (especially around the stiched edges) would make the skin pop even more (I am aware you'll be weathering him down down the lane of paintedness...)
9
Model In-Progress / Re: WIP - 1/10 GUTS (of berserk fame) ON HORSE BACK - commission
« on: March 31, 2012, 08:21:13 AM »
11
Model Gallery / 1/4 Selene - Underworld
« on: March 24, 2012, 02:20:42 PM »
Establishing scale at the 2012 IPMS Stockholm/Sweden exhibition...
13
Model In-Progress / Re: 1/4 Selene - Underworld
« on: March 14, 2012, 03:40:16 PM »
It's a kind of magic...
Today's work, from painting the yellow before I left for work this morning and the rest when getting home. Now for some washes and those final touch ups.
Today's work, from painting the yellow before I left for work this morning and the rest when getting home. Now for some washes and those final touch ups.
14
Model In-Progress / Re: 1/4 Selene - Underworld
« on: March 13, 2012, 02:25:55 PM »
The pillar done and primed. I'll just pray I'll get it done by Saturday morning...
Reference pic for the pillar:
Close up of one of the boots + showing off the subway floor:
Reference pic for the pillar:
Close up of one of the boots + showing off the subway floor:
15
Painting/Priming / Re: Help: Primer is rubbing off. What should i do?
« on: March 09, 2012, 03:54:58 PM »
A primer (spray) should cure over night before applying your first cote of paint.
If it is a resin kit and the primer still rubs off, you haven't cleaned the parts enough.
Soak in Castrol Super Clean or break fluid and clean thoroughly.
If it is a resin kit and the primer still rubs off, you haven't cleaned the parts enough.
Soak in Castrol Super Clean or break fluid and clean thoroughly.
16
Model In-Progress / Re: WIP - 1/10 GUTS (of berserk fame) ON HORSE BACK - commission
« on: March 05, 2012, 09:18:21 AM »
Done, more or less...
Left to do is gluing the base to the wood and the usual touch ups (such as trimming down the grass...). The kit will be displayed at Modellexpo 08 Open March 17-18th before being shipped to the commissioner.
Better photos to follow, of course.
Left to do is gluing the base to the wood and the usual touch ups (such as trimming down the grass...). The kit will be displayed at Modellexpo 08 Open March 17-18th before being shipped to the commissioner.
Better photos to follow, of course.
17
Model In-Progress / Re: 1/4 Selene - Underworld
« on: March 05, 2012, 05:50:48 AM »
The face is pretty much done w acrylic eyes and lashes:
18
Model In-Progress / Re: WIP - 1/10 GUTS (of berserk fame) ON HORSE BACK - commission
« on: March 01, 2012, 05:58:25 AM »
Back on the horse, quite literally ... ^^
In the immortal words of Eddie Izzard; Do you have a flag?
Well, now I do.
Lining fabric for the flag + the basic shape for the flag made from sheet mesh.
The cloth was dampened with diluted white glue in order to fix the shape and keep the fabric from tearing.
The parts for the flag were cut with a scalpel.
Yes, it Is the Swedish flag.
And no, it isn't.
Basically, I found the design in the Berserk artbook in one of the paintings depicting the battle which this model kit is from.
A lucky coincidence as it ties in well with my heritage at the same time as it is correct to the manga...
This. Took. Forever.
I sprayed the flag multiple times with Krylon Fixative.
Dry brushed and mounted to the pole.
Left to do is some weathering with pastels + the spear tip.
In the immortal words of Eddie Izzard; Do you have a flag?
Well, now I do.
Lining fabric for the flag + the basic shape for the flag made from sheet mesh.
The cloth was dampened with diluted white glue in order to fix the shape and keep the fabric from tearing.
The parts for the flag were cut with a scalpel.
Yes, it Is the Swedish flag.
And no, it isn't.
Basically, I found the design in the Berserk artbook in one of the paintings depicting the battle which this model kit is from.
A lucky coincidence as it ties in well with my heritage at the same time as it is correct to the manga...
This. Took. Forever.
I sprayed the flag multiple times with Krylon Fixative.
Dry brushed and mounted to the pole.
Left to do is some weathering with pastels + the spear tip.
20
Model In-Progress / Re: Fichtenfoo's Hornethopter - The Red Hornet
« on: November 16, 2011, 11:40:01 PM »For some reason, those don't always cure fully and can remain frosted as seen in your last pic.Really? I've been using the heavy gel for thicker uses than this and it always dries totally transparent whatever the thickness, you just have to give it some now drying time. I wasn't aware the medium gel was different. ^^
Nevertheless, looks fantastic! :)