FichtenFooForums

Create! => In-Progress Creations => Topic started by: Joa on September 09, 2020, 04:27:45 AM

Title: 1/5 Bisley Terminator (Mikey B) The Enemy Within
Post by: Joa on September 09, 2020, 04:27:45 AM
My prime focus on collecting is everything and anything from the Terminator Universe.
One of my absolute favorite artists is Simon Bisley, and combined with the extremely talented sculptor Mikey B (Underworld) this kit was a must have when it was released in 2011.
It doesn't hurt that it's based on the cover art for one of the best comics on the subject either.

(https://i.postimg.cc/CxRLCZqY/FB-IMG-1590667266724.jpg) (https://i.postimg.cc/hvvkbztT/enemywithin.jpg)



6 parts; Torso, arms, legs and weapon.
Arms and torso/lower body seams were puttied with tamiya quick type (vaseline method) for easy painting before assembly.

(https://i.postimg.cc/fJbK9XK0/resin.jpg) (https://postimg.cc/fJbK9XK0)

Stylynrez primer as usual (50/50 with thinner at low preassure).
White for skin areas, gray for clothing.

(https://i.postimg.cc/G97FWBLd/IMG-20200527-110328.jpg) (https://postimg.cc/G97FWBLd)


Flesh tones:
Vallejo Air RGB (421), flat cote and transparent extender on top pf Stlynrez white primer.
For the highlights (right) I added white and yellow + more extender.

(https://i.postimg.cc/7bWzBp9L/IMG-20200528-132813.jpg) (https://postimg.cc/7bWzBp9L) (https://i.postimg.cc/18xqSwLh/IMG-20200529-102544.jpg) (https://postimg.cc/18xqSwLh)


Basic blood work (oils), gloss black as base for the chrome color; Molotov 1mm pen.

(https://i.postimg.cc/tZbk48wb/IMG-20200529-162750.jpg) (https://postimg.cc/tZbk48wb) (https://i.postimg.cc/06nM73rP/IMG-20200529-162810.jpg) (https://postimg.cc/06nM73rP) (https://i.postimg.cc/SY2nFxdx/IMG-20200529-162855.jpg) (https://postimg.cc/SY2nFxdx)


Vallejo Red Leather (brush) for the base of the jacket. On top of that multiple layers of black with transparent extender.
This is after the first pass.

(https://i.postimg.cc/Y0ZJfSFD/IMG-20200530-104532.jpg) (https://postimg.cc/RJ1sv4Xw)


Stylynrez grey primer, masked with Silly Putty, then Vallejo Air + a bit gloss cote for that natural leather sheen.

(https://i.postimg.cc/SJN7n6KB/IMG-20200530-121809.jpg) (https://postimg.cc/SJN7n6KB) (https://i.postimg.cc/mh76YyBh/IMG-20200530-153930.jpg) (https://postimg.cc/mh76YyBh) (https://i.postimg.cc/ykBpv38j/IMG-20200530-153857.jpg) (https://postimg.cc/ykBpv38j)


More blood work + a black wash for the jacket.
Hair laid in (black wash on Stylynrez grey).
A drop of epoxy on the eye for the lens.

(https://i.postimg.cc/QBspr1vY/IMG-20200531-002356.jpg) (https://postimg.cc/QBspr1vY)


On to the gun; Basic masking on top of gloss black.
I used three metallics; Humbrol metal cote Gun Metal, Molotow chrome and Kosutte Gin SUN polishing powder (https://www.1999.co.jp/eng/10011510).

(https://i.postimg.cc/sMLcdMst/IMG-20200530-222548.jpg) (https://postimg.cc/sMLcdMst) (https://i.postimg.cc/w1M153Xb/IMG-20200531-184602.jpg) (https://postimg.cc/w1M153Xb) (https://i.postimg.cc/bdR4X9MW/IMG-20200531-184617.jpg) (https://postimg.cc/bdR4X9MW) (https://i.postimg.cc/crg77sQh/IMG-20200531-184658.jpg) (https://postimg.cc/crg77sQh)


Skulls....
Stylynrez grey primer with the white on the skulls.
Oils; Burnt Umber, Yellow ochre and Burnt Sienna. Hastily brushed on, let sit for a while and then wipe off.

(https://i.postimg.cc/5XmXLGkp/IMG-20200603-101516.jpg) (https://postimg.cc/5XmXLGkp) (https://i.postimg.cc/2q8VwwsY/IMG-20200603-103157.jpg) (https://postimg.cc/2q8VwwsY)

A black wash on the base, then dry pastels (Dark gray + a bit Burnt umber) along/on the skulls.
I then used brought the pastels up/around the skulls with a wide, flat, soft, slightly wet make up brush, then polished with a piece of cotton. I did one skull at the time for control.

(https://i.postimg.cc/14P5cMwj/IMG-20200603-124540.jpg) (https://postimg.cc/14P5cMwj) (https://i.postimg.cc/8fC2XF1j/IMG-20200603-124554.jpg) (https://postimg.cc/8fC2XF1j)


For the "wooden" base I used a steel brush to create graining.
Vallejo Red leather + Black + flat cote applied with brush with the base on a rotating disc.
Another pass with more black and then a Gloss cote followed with a drybrushing of burnt umber oil.

(https://i.postimg.cc/crgjKG6y/IMG-20200603-145155.jpg) (https://postimg.cc/crgjKG6y) (https://i.postimg.cc/2qkCWMrC/base-2.jpg) (https://postimg.cc/2qkCWMrC)


Technically done, but it's been sitting in quarantine waiting for final touch ups and beauty shots for quite some time now  :construction:

(https://i.postimg.cc/HnP1j23M/IMG-20200603-194530.jpg) (https://postimg.cc/wRJGGDCx)

(https://i.postimg.cc/KvzZFKQL/IMG-20200603-194449.jpg) (https://postimg.cc/dDbMjVbt)

(https://i.postimg.cc/FKjvG0st/IMG-20200603-220620.jpg) (https://postimg.cc/Lq6G8Y1v)

(https://i.postimg.cc/DZXNQB8T/IMG-20200603-220755.jpg) (https://postimg.cc/8JTwNdRK)

(https://i.postimg.cc/kgKv55gM/IMG-20200603-194148.jpg) (https://postimg.cc/cv1n903P)

(https://i.postimg.cc/d3hSNKm7/IMG-20200603-220658.jpg) (https://postimg.cc/kRdcDzH9)

(https://i.postimg.cc/vmykYkMj/IMG-20200604-093746.jpg) (https://postimg.cc/18WJMW8c)
Title: Re: 1/5 Bisley Terminator (Mikey B) The Enemy Within
Post by: FichtenFoo on September 09, 2020, 11:51:40 AM
That turned out really nice so far. The painting on the skulls is superb and the leather looks like leather.