Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - heavyarmscustom

Pages: 1 [2] 3
21
Model Talk / Favorite Build?
« on: October 01, 2006, 05:21:39 PM »
As far as Gunpla I would have to say it's a toss up betreen the MkII Ver 2.0 and my Pg Strike with the Aile strike pack Both OOB

But as of right now I would have to say my Zoid/ Microman Hybrid as I'm pinting it with a custom pant scheme

23
Model In-Progress / microman/zoid custom
« on: October 01, 2006, 04:38:30 PM »
Hey all Update!!!!!!!!!!!!!!!!!!!
I have figured that I will have to repaint the whole feaking zoid but I had to start with the micro.I dechromed the head and armor to make way for a custom paint job!

http://img.photobucket.com/albums/v203/hea...om/IMGP0630.jpg

I used Liquid Drano and a small container and left the part in overnight.
Aside from the stink and hazard of messing with an organic dissolver this stuff will eat chrome off with a quickness!!!! (oh and not hurt the plastic)

here's some more pics of the micro dechromed and some of the head and how cool it looks without all the chromeness

http://img.photobucket.com/albums/v203/hea...om/IMGP0638.jpg

http://img.photobucket.com/albums/v203/hea...om/IMGP0642.jpg

http://img.photobucket.com/albums/v203/hea...om/IMGP0643.jpg

24
Model In-Progress / microman/zoid custom
« on: September 20, 2006, 02:11:01 AM »
hello all
well I got the bug again and decited to merge a micro and zoid together once more!
this time it's for the evil side and my first time using the new 03 body styles then from the 99/00 style these are my in prog pics, as I have to paint and modify more parts
but this is the start  It's a micro Scol acroyear and a  Hel Digunner zoid(Iguana Type) I started by sawing off the legs and hip joints for Scol then cut away the connect point for the multi-gun on the HD's back

http://img.photobucket.com/albums/v203/heavy_arms_custom/IMGP0611.jpg

http://img.photobucket.com/albums/v203/heavy_arms_custom/IMGP0610.jpg

the bits are two suspension struts from a sherman tank kit and some parts cut off from warhammer 40K guns, cut to fit and glued to some plasic stock then to eachother to form a brace for the hips and lower groin area to rest in
here's a view of the struts

http://img.photobucket.com/albums/v203/heavy_arms_custom/IMGP0604.jpg


the rest of the pics are just porgress pics as I slowly build it up.
I will be adding more stuf and repainting the whole thing
with weathering hope you enjoyed
clifton

http://img.photobucket.com/albums/v203/heavy_arms_custom/IMGP0603.jpg

http://img.photobucket.com/albums/v203/heavy_arms_custom/IMGP0612.jpg

http://img.photobucket.com/albums/v203/heavy_arms_custom/IMGP0613.jpg

http://img.photobucket.com/albums/v203/heavy_arms_custom/IMGP0614.jpg

http://img.photobucket.com/albums/v203/heavy_arms_custom/IMGP0616.jpg

http://img.photobucket.com/albums/v203/heavy_arms_custom/IMGP0620.jpg

http://img.photobucket.com/albums/v203/heavy_arms_custom/IMGP0617.jpg

25
Kit Specifics / would anyone have info for this Hakushiki hop up kit
« on: April 10, 2006, 03:34:14 AM »
just looking for info on this set thanks
http://www.hlj.com/product/BCL2556
clifton

26
hello all
in my made quest to build evey MG gundam produced I'm finding that I'm more and more in need or a silver ink pen to do the darker armor parts of say a Rick Dais or a Titans MK II

I use a 005 micron ink pen to do all my pannel lines and was wondering if anyone knew of a small pen that came in silver like that
thanks and keep up the good work guy's
clifton

27
Kit Specifics / 1/100 scale Vs Railway figures
« on: December 27, 2005, 09:27:33 PM »
hello
I have found thaat buildings done in HO scale is about right
HO= 87th scale
The figures you get in the MG kit are about shoulder hight to true HO figures
Watch out for this, Some companys play fast and loose with scale figures
Rule of thumb the cheaper the figures the bigger the figures it in scale

but in a few ideas I have for diorama's I'll be using HO scale buildings
hope that helps

clifton

ps if you use 144 scale gundams use N scale buildings and figures

28
Model Talk / Aluminum Thrusters for 1/100 kits
« on: December 19, 2005, 12:07:46 PM »
Looking good Fulcy!!
I'm in to get some
also this sounds horrible but what the metric equivalent to .35" AS I have only worked in metric due to warhammer 40K and gundam

clifton

29
Model Talk / Aluminum Thrusters for 1/100 kits
« on: December 18, 2005, 02:19:53 PM »
hello
I love this Idea!
I put put down 15 to 20 for a set of four as I know custom machine work is not cheap.
but if get this done I'll go in on 4 sets of four thrusters or more
also are you going to post rendered pics of the thruster types?
    keep up the good work
clifton

30
Kit Specifics / Hello Need help translating a b-club instruction
« on: December 03, 2005, 10:40:43 AM »
Thanks Alot Pazu
this has helped greatly
hope to have some progress pics up soon of this set
clifton

31
Kit Specifics / Hello Need help translating a b-club instruction
« on: December 02, 2005, 11:00:38 PM »
Hello all
I just got the hop up parts from B-Club to put the HG Sword Strike armor on the the MG Strike
The instruction sheet is good but this one thing is bothering me.
here are pictures of the part that I think is inportant
I anyone could translate for me your help is greatly appreciated
http://img.photobucket.com/albums/v203/heavy_arms_custom/instruc1.jpg
http://img.photobucket.com/albums/v203/heavy_arms_custom/instruc2.jpg


clifton
Ps the section is in the Green box in the second picture
thanks again

32
Model Talk / Can Striker Packs from 1/100 be used for MG Aile Strike?
« on: November 14, 2005, 01:03:14 PM »
hello
you ned this from HLJ
http://www.hlj.com/product/BCL2447
It's for the sword strike but the launcher set should be comming out soon
It's part to convert the HG sword strike parts to the MG strike G
hope that helps
clifton

33
Assembly/Scratchbuilding / looking for workable plastic to make lightning
« on: October 27, 2005, 09:31:11 AM »
hello I'm back
here are the completed test on an electrical arc
I have to thank Foo yet again for suggesting the Gel meddium it's incredable.
I had a hard time figuring out how to strengthen the gel to stand it up
I used some plastruct fiber optic and splapped the gel on it
took a while but I got it the way I liked it  hope you do to
 
http://img.photobucket.com/albums/v203/heavy_arms_custom/light4.jpg
http://img.photobucket.com/albums/v203/heavy_arms_custom/light3.jpg
http://img.photobucket.com/albums/v203/heavy_arms_custom/light2.jpg
http://img.photobucket.com/albums/v203/heavy_arms_custom/light1.jpg

34
Assembly/Scratchbuilding / looking for workable plastic to make lightning
« on: October 08, 2005, 12:30:40 PM »
I've been experimenting with different mediums. I like the gel med as a base for exploding energy and the water effects as a ropy energy look but I need some thing that will make the med to thin arks and that will hold their weight
I tried the carving of the styrene but i'm more of a 3D modeler and like to sculpt as I do along. I'm thinking of getting clear  small acrylic rods from plasctruct and using them as the base and then adding the medium to it. I found the new paint at our local JO ANN Fabrics I'm going to try to put it through an air brush but the name brand escapes me but the name of the paint is Halo blue green, I my use that as the all around paint then the spray can purple to  green.

I have to get the G-gundam back together but that will be easy and if not I'll get another the base will be the hard part and I've been looking for the palm trees big enough to hide a LED but small enough to look scale

other then that I've got kind of taken a break as I just got through a local model competition and won 1st, 2nd and 3rd in my group and best over all in Sci fi class
hellish to say the least

if anyone has suggestions I'm all ears as this may turn out to be a little  to much for me

clifton

35
Painting/Priming / Making Tamiya Metallic?
« on: September 13, 2005, 11:50:58 AM »
I have two cent to add to the pearl part of the question

I have a friend that works in an auto body shop and he got hold of some real crushed pearl dust that they mix in their clear coat

I've done some experimenting and have found if you want a good look to your paint using pearl  use the same color pearl as the paint or the direct opposite color pearl.
blue works wonderfully on the white grey of the 78 series gundams, green on the z'gok's and green zakus and copper for the red gunncannons and zakus.

you only need a little (I use 4 tamiya stirrer spoon fulls in a acrylic top coat small airbrush bottle though I think I'm going to switch to future floor polish soon.
thanks
clifton

36
hello
well I'm back with one more small question
first off the gell medium will work but the act of carving the plastic and placing the gel med is a pain  
but hard work is it's own reward

now the question


would woodland senics realistic  water or EZ water  work as a semi workable/flexable medium to try on the energy arcs.

thank
clifton

37
Model In-Progress / Inner working of the MG ball
« on: August 26, 2005, 02:13:08 AM »
hello all
I just have to put some finishing touches on this ball and I'll be done
there's a little clean up painting and some going over but all in all the is was a pratice in hand painting metallics(as a friend of mine said it could not be done) I will say brush painting metalics is a pain in the ass
But I found sone Bronze by golden . the darker silver is velajo(sp) aged chain mail
and the silver on the web is from a silver metalic marker I bought at wally world
oh yea the copper was from golden and I used gun metal from Model master's

hope you guy's like it
clifton













and for those of keen eye the last picture in the lower left(facing) the darker area is battle bamage as the primer spit these huge bubbles all over the top portion of the ball
so I made it bubbled/ dmaged parts I think it added to the model.
I wish I could do the color change of heted metal by hand brushing
 ok it's time for bed
please feed back is much needed as this piece and the other ball mod are oing into a model competition in OCT

38
Thanks A lot Foo!!!!
That was the best advive I have ever got.
now to make it a reality

I also forgot to mention I'm going to paint the G-Gundam in darker colores (I was thinking Poly-chromatic purple to green and air brush or hand paint circuitry paterns on the armor and place Blacklight LED in hidden places to shine on the model to make the lightning and circuitry glow in normal light

I'll post pics when I get it going
thanks again
clifton

39
hey guys
I was hopping with all the great minds here that some one could point me in the right direction

I'm looking for a plastic that I can make into lightning/enegy arcs

the stuf I'm looking for is the same stuff that the STAR WARS figures have that simulate energy arks across droids.

I'm in the process of making a the God Gundam dio and want arks that run all over the arms and legs and run to the ground

but I have had no luck  trying to find the type of plastic or if I can sculpt or mold the peices.

sorry if this is a bit vague, I'm typing this as I have one foot out the door to work
clifton

40
Model In-Progress / In progress MS 08 MG BALL MOD
« on: July 29, 2005, 09:37:01 AM »
the reflection is the Hobby store I work at .
I didn't know the reflection was so bad
just wanted a neutrall background

Pages: 1 [2] 3