You can now order my latest walking tank design from Mig Productions. It comes in two flavors as usual… a flame thrower turret or the standard cannon turret. The price is 58,00EUR and you can convert that here.

I applied the pigments the other day and made a new base so this build is done! The other base was not wide enough so a new one was required… the 38t(x) has a leg-span of about 6″ and the old base was done on a 4″ box. Doh! The figure is from the Dragon DAK set and is nicely molded. I painted it with oils.

Like I said earlier this latest of my walking tanks was painted up for the box-art and should be available some time this month from Mig Productions. Tow flavors will be available…. one with a turret and one without in case you want to use a different one. The casting was amazing and not much clean-up was needed at all. Not sure of the final price yet, but probably comparable to my KV-2X and Hovertank designs.

Enough yakking… pics!

See the gallery below for some parts images before I did the clean-up. The parts laid out on the towel were after I did the degreaser bath and scrub in order to make sure I had everything and for a pic of all the parts.

After the clean-up I primed everything with the green Duplicolor Self-Etching Primer.

Once cured I applied a coat of a dark blue-gray to all of the parts.

Then lastly for this update I clear-coated it all in Future Floor Acrylic and applied German insignia decals from my Dragon 38(t) kit.

Tomorrow I’ll hairspray the parts and apply the buff desert coat which will be chipped lightly to show the base-color beneath.

This makes three in my MGX4 challenge. (click the logo) Now I just need to do one more before April 30th and I win nothing but the satisfaction of building a bunch of kits in a short period of time. Yay me.

Anyway, this is the Master Grade Zaku 2.0 in Char Aznables custom colors. Originally I was going to do this for myself in a different scheme, but I got an offer on it to build it as a Char version and it turned into a commission. I snapped some quick images without any pose because I don’t want to accidentally scratch the paint before shipping it out.

As for what I did to this one…

• Replaced all bells with Mechaskunk and Ako Creations Aluminum thruster bells.
• Replaced pipe bead insides with springs.
• Applied Ako Creation Metal Transfers (awesome BTW!)
• Added vernier to front chest.
• Replaced eye with SP Eye metal part and Aurora Sticker
• Replaced weapon lenses with Aurora stickers
• Internals painted in mixtures of Mr. Color (Gunmetal and Titanium/Brass)
• Bandai and HiQ decals
• Mechaskunk screws for shield inside
• Aluminum shoulder spikes

All of the pics show these guys with their tails on the ground when moving. That seems odd to me given what’s known about dinosaur movement these days. (probably a necessary evil on the part of the model makers to get it to move neatly) Since they have the same basic shape I decided I would modify the pose a bit to show it running a little harder than seen before in the film with the tail in the air.

I started out with a wire armature and bulked the chest area up with a small ball of foil and then covered that in some wire mesh. Over that I started applying sculpey to get the basic shape down. I started by sculpting and detailing the head since that would be the hardest part. I figured I could hold the body if necessary for extra support while sculpting. Glad I did! After that I started applying the rest of the shape and arms.

I think this is as far as I can go for now before I need to bake it to add more details and the other leg. The leg will need to be removable for casting. I’ll also sculpt the saddle and straps then. After another bake I’ll do the rider and it’ll be ready to go!

EDIT: Couldn’t resist so I added the saddle. You can also see the start of the left leg and where it will be cut off.

I applied the paint chips using neutral gray with a very fine brush then afterwards added more with some sponge to get the finer masses of chips and scrapes.

After the chips I added an warm buff colored filter in order to warm up the cool gray of the initial painting. After that I applied the discoloration with oil paints. This is done by adding small dabs of oil paint (I use and love the 502 Abteilung brand… very fine and smooth!) then blending them and streaking them with clean odorless turpenoid. For this I used Dark Mud, Navy Blue, Buff, and Dark Rust colors. Below you can see the difference between the discolored speeder (left) and the one with just a filter applied (right). Notice that it gives you subtle variations in the surface color making it appear more worn.

Once that dried overnight I went back and added more Dark Mud oils to the gun crevasses and engine parts. I also applied slightly thicker filters of either Dark Rust or Snow White 502 oils to further accentuate panels.

Next I’ll use some thinned 502 oils and apply a thin wash to just the panel lines. No need to get sloppy with a thick wash covering all the color variations. After that I’ll apply another flat coat and then do the soot-streaks, rust, and grime with Mig pigment powders.

I opened the 4 boxes and started construction on this quartet on Sunday morning. By Monday evening I was priming the kits. They’re very simple and straight forward to build with only a few easy areas needing seams fixed or gaps filled.

Once the primer had cured I sprayed the interiors with Tamiya Neutral Gray then using a small brush painted in the details. After a quick spray of Future Floor Acrylic to seal it I applied a wash of thin 502 Abteilung blue + black oil paint to pop the control details. After that I applied tape to the insides of the canopy frames to mask the interior and set about painting the exterior.

At first I was going to use the hairspray technique, but after looking at references of the studio models I decided that level of chipping would be excessive. Instead I started by painting all four speeders in Tamiya Neutral gray then painted over that with a very light gray… almost white, but not quite. When that cured I went about painting on the markings instead of using the provided decals. While I love orange on the speeder, nothing I’ve seen, studio models or film shots seem as orange as Fine Molds decals do.  If anything it’s red-orange (to me) so that’s what I did for two of them.  The other two I mimicked the gray scheme of Luke’s speeder as seen on the Master Replica version which I had lots of pics of in an old issue of TMMI since I couldn’t find shots of the actual model used.

To paint the markings and chips I first masked everything with Tamiya tape. Then using Mig’s Liquid Mask and a sponge I dabbed on what would be the chips after painting. Then I painted the markings, rubbed off the mask, and repeated as needed for the different colors. It was a LOT of work! LOL!

Next up, airbrushed dark soot and darker chipping.

Slacking again… I had actually almost finished these months ago, but due to other commitments I had put them aside for a bit. Today I spent 20 minutes finishing them up and now they’re ready to be shown and shipped to my client. Eventually these two 1/72 scale Tie Interceptors  by Fine Molds will be paired with my Y-Wing for a chase-scene diorama. For now though they’ll be enjoyed sitting on my client’s shelf until I’m ready to tackle the project.

Because I did these a few months ago and didn’t do an in-prog report I can’t recal much of what I did, paint-mixes, etc… I know I used some Tie Fighter canopy masks I purchased at Starship Modeler. They were decent, but left way too much residue on the canopies. To keep them from ebing a boring solid color I used oils for discoloration and to highlight panels.

The Hover Tank is up and ready to be ordered! Check out the Mig Productions International  store here. US buyers should keep an eye out on the Mig USA store here. If you get it and build it, let me know! I’ll post an image up here on my site.

The 1/35 scale Martian Light Hovertank is all done and I finished it a day before deadline. Yay me! Anyway, enjoy the images and keep an eye out for this kit when it hits the Mig Productions website and hobby shops in December. If you get it and build one, please let me know and I’ll post it up here. Onto the images: